Not long now....:o)

[EFFalcon]

Very well put together guys.
I'm impressed with it all as a whole.

Sunny: i seen that EF with the white wheels today... they're damn hot :o

[Sundeep]

There's also EF gutter rails and and front windscreen surrounds, but we used original EA seals. There's a bit less wind noise but the car's generally a LOT quieter. A lot of road noise has been cut out and my noisy old central locking motors were replaced with better condition ones which were already in the doors, and the locking noise is a lot quieter.

Just have to deaden the boot now!

Also, I really need to offload the old ED GLi interior and panels. I'll offer the WHOLE interior for like $15 and all the panels besides boot for like $10. That's 4 doors, 4 guards, a bonnet, a front bar and other shit for $10. I also have a full set of shockers and springs from a Police pack (20mm lower than standard) which I want to get rid of.

If anyone's interested in anything let me know! My garage is a fricken mess.

Sundeep

[pauly85]

nice stuff man, turned out friggen awsome!

what are u doing with the door moulds? did u get ghia ones or u just gonna leave it without them?

i gotta see this thing in the flesh!

as i said in an earlier post, time for another eastern cruise!

[pauly85]

also this pic reminds me of one i took:

[Sundeep]

They're all painted and that just have to get some chrome stripping made up for them again and buy the Ford stuff for the bars, then I'll stick 'em on.

I don't know what to do now! Stick EF stockies at all corners and save till April for wheels or sell the turbo kit and buy them now...decisions decisions!!! Shouldn't look bad with stockies but, I saw BADABZ in the city a while ago (acid rush EA) with stockies and that look nucken futs. Might take another coupla coils off the rear as well, too high.

So much stuff to do, but it's all worth it!

Sundeep

[pauly85]

if i were u id sell the turbo, buy some wheels, then get a tired el or au engine and in your spare time work the fudge out of it with 5 speed behind it!

[Sundeep]

Yeah that's kind of along the lines of what I was thinking only I would buy a stock AU/BA motor (from a wreck I'd buy) and trans and slap them in, but that would be a long time from now.

Moving on, how's this for before and after:

BEFORE


AFTER


Sundeep

[DentEd XR8]

I must say I'm very impressed, looks real sweet, it must be very satisfying to have done it all yaself aswell.

Now I'm left wondering whether or not I should update the colour of my car when it comes time to respray, all these awesome colours out there now is making it really confusing.

[FPVWEPN]

just one question sunny as i had teh same problem when i put that interior in my old car: how do u wind up the windows at the back when the ash tray is in the way??

[spope]

That's easy. You convert to power windows That's the only solution I've been able to come up with, and the reason I still have GL door trims in the rear. I'll put power windows in eventually.
Sunny: I still can't believe how good that looks.
What condition are the ed doors in? Straight, no dents? Bonnet the same? If so, send me a PM. I can get the van from work and come up next week sometime. Also probably the springs and shocks, and I do still want that rack.

[EFFalcon]

u put the EA garnish back on ? :P

[Thanatos]

That's lookin' real good sunny!

A few little touches (boot garnish, rims, door moulds, etc.) at she'll be a showpeice!



So doug, i still remember you saying you'd help spray my bonnet and headlight assembly! :P

[Sundeep]

Nah that's a photo from when it just go home, the garnish and all that are done along with the windows as youse can see from the other photos :P

Spope, they are my old panels. They have small dents here and there but the bonnet is probably beyond repair. You may be able to fix the doors and that up but, bogging aint that hard! It's all yours free if you can take it all. I'll throw in EF window linings and door soundproofing.

FPVWEPN, that's a problem I had in my old car. Might need to upgrade to ED door trims or something lol. I don't think they have the ashtray?!? I have front power windows that I should chuck in, but the f*ed factor is a bit low.

Sundeep

[Psycho Chicken]

Sunny, what colour are the panels you have?

[Tiga_EL]

Once again , That is one top job, stunned!!!!!! I particularly like the idea of spraying the key lol ;)

IMO i reckon you should buy two 18" s and put stockies on the back, until youve got enough funds to buy the other two..... ;)

Rupinder

[EFFalcon]

bwahhaha
chuck ENVI stockies on it ;)

Rob: my guess is that the panels are all white.

[Interceptor'85]

Originally Posted by EFFalcon

bwahhaha
chuck ENVI stockies on it ;)

Lolz, now that would be awesome!

[Tiga_EL]

...........................

[Sundeep]

Got me self a sick Preston Diffs sticker...finally, going on the window tomorrow. I'll try get some stockies happening by tomorrow night as well and get the bumpers adjusted. Paint should be dry enough to do that.

Panels are white and they are EA sorry, not that there's any difference besides intrusion bars. They'll need a bit of bog but should fix up sweet, my new one's needed some but they came up swoit.

Sundeep

[Psycho Chicken]

Ah if I need them I'll need EA panels anyway. And white is perfect, I'll let you know.

[spope]

Sunny: Dents are fine, easy to get out. Ripples are a lot more difficult, that's what's on 2 of my doors. I'd want white ones anyway, white is so damn easy to paint over. However, I won't actually need them for a few months, so I would just store them, so Rob, if you've got an immediate use for them, go for it.

[SileNceR]

when are the door handles and mirrors going on sunny? (or if they are on, where are the photos?)

[Damo]

i think they're on the first page dude.

I saw the beast yesterday, and i gotta say.. it's still got nothing on my EA. ;)

haha, jk, it looks bloody brilliant!!! even with the 14's.

oh and thanks for the rack, it seems good. :S Took about 2 hours to get the ****er bolted to the K-Frame, damn inexpeirience. Thats where it stands now, i'll get some fluid and line it all up best i can tommorrow and maybe take it for a drive. *shudders*

Damo. :

[LUXO_8]

that drive would hopefully be to a wheel aligner damo

[Damo]

nah, upto the footy oval. ;)

don't worry Wayne, i will be getting it all inspected properly. It's soo hard to tell if everythings OK. Strayin off topic now, back to Sunnys paint

Looks awesome, and don't call me knackers. ;)

Damo

[HOON69]

looking good cant wait to see the end result.. ;)

myself im undecided on paint atm i'll need to browse colours i thinks :P

[Sundeep]

Yeah it's got all the mirrors and handles on it, go to page 1 or 2 I think Silencer.

As of tonight the bar's are all FT'ed up and I've ordered some chrome sticker stuff for the windstrips. I'm also buying the stuff for the bars from TUFED6 on Wednesday. I'll get a pic with all that stuff on it and some EF steelies.

Wheels will hopefully be on in time for AFD.

Oh, and I also got a Preston Diffs sticker for the rear window

Sundeep

[Sundeep]

Oh and Knackers :P Of course '(the rack) seems good', it's another Quality Sundeep Part(TM)

Sundeep

[dansedgli]

dont sell the turbo kit sunny, It was too cheap to get rid of, Ill give you another ride in my car now that we fixed the boost problem and you will change your mind. A turbo 4.0 will shit all over a worked NA AU/BA engine. Do you still want me to bring those stockies around?

[Kenaz]

Originally Posted by Sundeep

Oh and Knackers :P Of course '(the rack) seems good', it's another Quality Sundeep Part(TM)

Sundeep

lol if it's no good we'll bring it back for a warranty job :