|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
01-06-2007, 07:21 AM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2007
Posts: 18
|
hey guys.
just wondering how hard it is to replace the rear tail light and front side mirror of an eb falcon...ne help would be appreciated |
||
|
|
|
01-06-2007, 08:23 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Northern Tablelands
Posts: 940
|
not hard at all,,remove the trim pieces unbolt then replace..with the mirror,,remove screws then replace.
__________________
2000 AU Wagon |
||
|
|
|
|
02-06-2007, 01:23 AM
|
#3 | ||
|
HANK
Join Date: Aug 2005
Location: Adelaide
Posts: 150
|
Tail light will be easy as. When i tinted my tail lights and garnish the tail lights simply screwed off, and then back on, and the wires just clipped in from memory. I cant see the mirror being 2 hard either.
__________________
1992 EBII Fairmont Lowered 30mm on kings springs and monroe struts/shocks Performance catback exhaust with stainless 3 in tip! Shift kit! Tinted windows n tail lights. Pioneer 200w flip face head unit 600w pioneer sub backed by my nu 640W kenwood 4 way amp Eclipse 6x9s and 6's Clear front and side indicators 115 rwkw on regular, not bad for pod, catbak! Back on the rd! nothing can stop us, not a defect or even a stoby pole!! BAHAHA  NEVER SAY DIE!!!
|
||
|
|
|
|
02-06-2007, 10:06 AM
|
#4 | ||
|
Regular Member
Join Date: Mar 2007
Posts: 267
|
Well mate with the mirror, (if you are talking about the whole unit) is actually a bugger to replace. You see there is a large U shaped spring, and if it comes out you may be there for some time trying to get it back in. Open up the ends of the spring just a bit. Put the bottom one on first (assuming the mirrors gone) and then squeeze the end tight. Using pliers, grap the top of the spring behind the hook and pull it over the hole. In the case of power mirrors.. ensure that you but and match the wires correctly. Good Luck! PM me if you need any help.
__________________
Hamish  ED, Lowered Lovell Springs, Monroe GT gas shocks, SAAS Racing Buckets, SS Lab Sound System, Carbon Fibre Wheel, Full Sports Exhaust System. |
||
|
|
|
help
Linear Mode
