![]() |
|
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: Jan 2006
Posts: 141
|
How many owners use fish oil on their cars, I have been useing it for fifty years and have never had rust in the places I have used it, eg doors the rear of front guards the panel under the two doors from the start of the front guard to the start of the rear guard, it sets likes concrete, years ago we had to use an oil can, but today it is a lot better with pressure pack cans as you can get it up into the hard to get at places, if you use it make sure you are on level ground so the excess can drain off as it is a b/stard to get off once it dries....$2 shops about $3 a can, use heaps, but clean off any run off before it dries.
|
||
![]() |
![]() ![]() |
![]() |
#2 | |||
Bad Music and Litre Bikes
Join Date: Dec 2004
Location: Westmeadows
Posts: 2,446
|
i dont bother with the e-series. But its something i'll consider for the XY when it gets rebuilt. Especially in the sills.
But i think the e-series were prepared a fair bit better than their 25year older brothers.
__________________
XY Wagon - NAKED! Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#3 | |||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: North Brisbane
Posts: 8,529
|
It was used on my car (and suggested to continue using) by the smash repairer when my poor baby was in there last year...
If you want something that gets it off without any major dramas (or harsh scrubbing).. use Paint Doctor by Repo.. (I have found this is the best, easiest and quickest).. Cheers Kerri
__________________
Quote:
|
|||
![]() |
![]() ![]() |